Site Map

HOME                   ABOUT               PRODUCT

Add:Room 1307, building 2, no.7866 humin road, minhang district, Shanghai


Copyright © 2006-2018 Shanghai yiwei industrial equipment Co., LTD   沪ICP备05027919号-1

Shanghai yiwei industrial equipment Co., LTD

Page view:

PMEM oil pump fan motor

Application Applicable for: the cooling of the independent cooling circuit of hydraulic system, lubricating system and gear box. Typical application: the cooling of hydraulic power station, lubncatlng system and gear box. Product characteristics Designed wIth 35 bar damIc rated pressure, high-performance axial flow fan and tightty structured high-efficiency fin, the product can realize the best cooling effects. Oil pump motor and fan motor can be controlled respectively. When the oil temperature Is low, the fan motor is switched off to save the energy saving and decrease maintenance cost. The connection between oil pump and cooler can form a safe and independent cycle cooling circuit to avoid the impact of the system oil return, and can also connect to the high-performance filters. Strong self-absorption ability and low-noise gear pump Is used with the maximum Inlet pressure up to -0.4bar. Pump displacement 32mI/rev, 40ml/rev, 63ml/rev, 80ml/rev. In case that other displacement is required, please contact JUNWELL. 8 kinds of piping methods are available to meet any requirements (please see the piping diagram). For special requirements, please contact JUNWELL. Standard for oil Inlet and outlet: G screw thread: other threads can be custom-made. Operating voltage: AC 220V, AC 380V, AC 415V, AC 440V. AC690V. In case that special voltage is required, please contact JUNWELI.
Technical parameters
Piping diagram
Technical parameters - FMA an fan motor series
    Suitable for: hydraulic system return pipe road, independent cooling circuit, the cooling lubrication system.
   Typical application: coal mine machinery, chemical machinery and oil and gas field mechanical hydraulic power station, lubrication system, gear transmission cooling.
Product features
       Cooling capacity: cooling power at ΔT=40℃.
       Different power consumption is available under various voltages. This table only takes AC 380V as examples. Axial flow fan type: the standard type is wind suction type, IP44, IP54, oil pump motor: IP54, IP55, F-class insulation, complying with CE standard.
       Noise value given in the table is measured at lm, which is for reference only because it may be influenced by ambient environment, viscosity and reflection and other factors.
      Medium: mineral oil, complying with DIN 51524. For other media, please contact JUNWELL.
Cooling power
Pressure drop of thermal fluid
Type designation
Overall dimension
Fore special requiremenys, Pleas contact JUNWELL
Corresponding parameter set not found, please add it in property template of background
Previous article
Next article