Home page

EMT1 special-purpose

Application Applicable for: the cooling of the oil return pipe of hydraulic system, independent cooling circuit and lubdcating system. Typical application: the cooling of the hydraulic power station. lubricating system and gear box of coal mine machinery, chemical machinery, oil & gas field machinery. Product characteristics The product is designed to reach the best protection requirement with 35 bar dynarmic rated pressure, high-performance Exd I explosion-proof motor and fan blades made of special material and specially designed housing protection. Equipped with the tightly structured high-efficiency fin, it can achieve the best cooflng effect. The product of each type Is designed with two kinds of speed to achieve the best operating performance. Additional pressure bypass circuit or temperature control bypass circuit can be added according to the working requirements. For the sake of safety. it Is not recommended to use temperature switch and fitter in the explosive area otherwise specified. 8 kinds of piping methods are available to meet any requirements (please see the piping diagram). For speaal requirements, please contact JUNWELL. Standard for oil inlet and outlet G screw thread or SAE standard flange: other threads can be custom-made. Operating voltage: AC 380V, AC66OV, AC1140V. In case that special voltage is required, please contact JUNWELL

Keywords

FMA AC Fan Series | HM Hydraulic Motor Series | FMD DC Fan Series | EM Standard Motor Series | EMT1 Special Motor

Classification

Related Products

Product inquiry

Technical parameters

Piping diagram

Technical parameters - FMA an fan motor series

Application

Suitable for: hydraulic system return pipe road, independent cooling circuit, the cooling lubrication system.

Typical application: coal mine machinery, chemical machinery and oil and gas field mechanical hydraulic power station, lubrication system, gear transmission cooling.

Product features

Cooling capacity: cooling power at ΔT=40℃.

Different power consumption is available under various voltages. This table only takes AC380V and AC 660V as examples.

Axial flow fan type: the standard type is wind suction type, IP54, IP55, IP65, F-class insulation, complying with national Ex standard and international CE standard.

Noise value given in the table is measured at lm, which is for reference only because it may be influenced

by ambient environment, viscosity and reflection and other factors.

For the sake of safety, temperature switch and filter are not used.

Medium: mineral oil, complying with DIN 51524. For other media, please contact JUNWELL.

Cooling power

Pressure drop of thermal fluid

Type designation

Overall dimension

Fore special requiremenys, Pleas contact JUNWELL

None